top of page
Widget Didn’t Load
Check your internet and refresh this page.
If that doesn’t work, contact us.
Order Code | Dimension |
PCCNB150 | 6"x0.08"x0.020" |
PCCNB150 | 6”x0.985x0.20” |
PCCNB200 | 8"x0.0985"x0.020" |
PCCNB200 | 8"x0.0985"x0.024" |
PCCNB200 | 8"x0.0985"x0.028" |
PCCNB200 | 8"x0.0985"x0.032" |
PCCNB200 | 8"x0.0985"x0.040" |
PCCNB2512 | 10"x0.032"x0.044" |
PCCNB3015 | 12"x0.04"x0.06" |
PCCNB1404 | 14"x0.98"x0.040" |
PCCNB1448 | 14"x0.98"x0.048" |
PCCNB1460 | 14"x0.98"x0.060" |
PCCNB1640 | 16"x0.98"x0.040" |
PCCNB1648 | 16"x0.98"x0.048" |
PCCNB1660 | 16"x0.98"x0.060" |
PCCNB1848 | 18"x0.98"x0.048" |
PCCNB1860 | 18"x0.98"x0.060" |
PCCNB2048 | 20"x0.98"x0.048" |
PCCNB2060 | 20"x0.98"x0.060" |
PCCNB2460 | 24"x0.98"x0.060" |
PCCNB2480 | 24"x0.98"x0.048" |
PCCNB3680 | 36"x0.98"x0.080" |
PCCNB3685 | 36"x0.98"x0.0850" |
PCCNB4085 | 40"x0.98"x0.085" |
Hvordan man køber
Anmod om et tilbud på udstyr
Ready to buy stuff from Flexible,Request a quote now.
Bliv en Delare
At blive en autoriseret Flexbile-forhandler
Butik
Browse Parts and equpments on our store
Solution
Fleksible løsninger, der hjælper dig med at tackle enhver udfordring
Reviews
Widget Didn’t Load
Check your internet and refresh this page.
If that doesn’t work, contact us.
FAQ
Q:When should a coarse blade be used?
For eksempel: et groft tandblad (f.eks. 2 eller 3 TPI) skal bruges til tykkere papir. 18 til 32 TPI bør bruges på tyndere metaller eller plastik (0,5 cm eller 1/4 tomme). Generel træskæring kræver typisk omkring 4 TPI.
Spørgsmål: Vil flere tænder pr. tomme på en savklinge give dig et groft hurtigere snit?
In general, blades with more teeth yield a smoother cut, and blades with fewer teeth remove material faster. A 10" blade designed for ripping lumber, for example, usually has as few as 24 teeth and is designed to quickly remove material along the length of the grain.
Q: What is the difference between fine and coarse saw blades?
Blades for circular saws come in the same options as are available for table saws—fine-tooth blades for precision cross-cutting, a coarser blade for rip-cutting, and a combination blade for all-purpose framing carpentry.
Spørgsmål: Hvad er grovtandet klinger bedst egnet til skæring?
Tynde materialer som metalplade fungerer bedst med en fintandet klinge. Hvorimod tykke, tætte materialer som konstruktionsstål passer bedre med en grovtandet klinge.
Q: How is the coarseness of a saw blade determined?
This is usually quoted in teeth per inch (T.P.I.). The larger the tooth, the faster the cut, because the tooth has a large gullet and has a greater capacity to transport large amounts of sawdust through the job. Generally, the larger the tooth, the coarser the cut, and the poorer the surface finish of the cut.
Q: Hvad er en groft skåret sav?
Groftandede save er gode til at skære gennem tykkere eller hårdere materialer hurtigt. De bredere mellemrum mellem tænderne betyder, at de kan rive mere træ ud for hvert tryk af klingen, men slutresultatet bliver ikke specielt pænt.
bottom of page